HomeGarageNISMO CRS: Nissan's Own Skyline GT-R Restomod Comes Within Reach of Australia

NISMO CRS: Nissan’s Own Skyline GT-R Restomod Comes Within Reach of Australia

Nissan's own factory-built Skyline GT-R restomod, the CRS that sold at Lake Como, and why Melbourne now has a direct line to Omori.

/
/
/

On Sunday 4 October, a black R32 GT-R sat up on a hoist in a dealership workshop in Melbourne’s east, and NISMO had its first Performance Centre outside Japan. More than 300 enthusiasts turned up to Ferntree Gully Nissan for the opening, according to Nissan.

The parts counter and the factory-certified Meisters are the headline. The bigger story is what sits at the very top of NISMO’s menu: the CRS, Nissan’s own Skyline GT-R restomod. It makes the strongest case for a factory restomod going, because the people rebuilding the car are the people who built it in the first place.

What is a NISMO CRS?

CRS stands for Clubman Race Spec, the concept specification NISMO offers for the R32, R33 and R34 Skyline GT-R. It’s built through the NISMO restored car program at the Omori Factory, and it’s a restomod in the purest sense: a full factory restoration, then a chosen list of NISMO, R-tune and Z-tune parts fitted by the company that makes them.

They’re rare. Magneto described the R34 CRS sold at Villa d’Este this year as one of fewer than 20 CRS-restored GT-Rs. NISMO’s own register lists six CRS builds, serial numbers 002 to 007, finished between June 2023 and May 2025. NISMO now publishes an R35 CRS spec too, but the heritage cars are the ones that matter here.

How NISMO rebuilds a GT-R before the CRS parts go on

Nothing about it is cosmetic. NISMO says its restorations aim to make performance visible, bringing the car back to close to new-car performance rather than just making it shine. Every car gets a condition check at the Omori Factory first, and NISMO decides whether it’s a candidate at all. Build time is about six months to a year.

The shell is stripped, measured against Nissan’s design values and repaired, then the paint comes off and the body is e-coated. NISMO measures torsional rigidity and brings it back to new-car level, the one step no private restorer can copy. The engine is fully rebuilt, balanced and run on a test bench before it goes back in.

The interior is the clever bit. NISMO says the original trim can’t be reproduced under current regulations, so it offers a retrim in R35 GT-R materials, coordinated with Nissan’s designers. Every finished car goes on a chassis dyno, gets a shakedown from a NISMO test driver or a pro driver, and wears a serial-numbered model plate.

Dark blue R32 Skyline GT-R V-Spec tuned by NISMO Omori Factory, parked in a car park
An R32 GT-R V-Spec with NISMO Omori Factory’s S1 tune. A CRS goes much further, starting from a bare, re-measured shell. Image: 8888Nippon, CC0, via Wikimedia Commons

What goes into an R34 CRS

NISMO publishes the CRS parts list for each generation, and the R34’s reads like the back half of a NISMO catalogue. The engine is NISMO’s R2-spec RB26, breathing through an NE-1 titanium exhaust, a Z-tune air cleaner duct and a NISMO intercooler, with an oil cooler kit to keep it honest.

Underneath, a titanium tower bar, underfloor braces and front and rear performance dampers stiffen the shell. Öhlins suspension, LM GT4 wheels in the machined-logo finish and a genuine Brembo kit from the R35 GT-R do the rest. Drive goes through a Super Coppermix Twin clutch and a front LSD.

The body gets the Z-tune treatment up front: carbon front bar, guards and undercover, plus an R-tune carbon bonnet, side skirts, a rear spoiler flap and GT diffuser fins. The R32 and R33 run NISMO’s S2 engine instead, with the same suspension and brake recipe. That consistency is the point. It’s a NISMO spec, not a wish list.

TorquePress explainerOne recipe, three generationsWhat NISMO lists for each Skyline GT-R Clubman Race Spec, from its published parts lists.
R32BNR32 CRS1989 to 1994
EngineNISMO S2
ExhaustNE-1 titanium
ClutchCoppermix Twin
SuspensionÖhlins
BrakesGT-R Brembo kit
WheelsLM GT4
Body: tower bar, underfloor braces, dampers
R33BCNR33 CRS1995 to 1998
EngineNISMO S2
ExhaustNE-1 titanium
ClutchCoppermix Twin
SuspensionÖhlins
BrakesGT-R Brembo kit
WheelsLM GT4
Body: adds a carbon rear spoiler set
R34BNR34 CRS1999 to 2002
EngineNISMO R2
ExhaustNE-1 titanium
ClutchCoppermix Twin
SuspensionÖhlins
BrakesGT-R Brembo kit
WheelsLM GT4
Body: Z-tune carbon front end, R-tune bonnet
Source: NISMO Clubman Race Spec parts lists, checked November 2026. Production years are for the base GT-R generation.
Bayside Blue R34 Skyline GT-R V-Spec with a carbon bonnet and silver wheels, parked at a car show
Every R34 CRS starts as a standard GT-R like this V-Spec before NISMO strips it back to bare metal. Image: MrWalkr, CC BY-SA 4.0, via Wikimedia Commons

BNR34-404238: the CRS that went to Lake Como

The best-documented CRS of the moment is chassis BNR34-404238. It started life as a 2002 Skyline GT-R M-Spec, one of 366 built, with about 16,000km on it. NISMO stripped it, rebuilt it and repainted it from QX1 Pearl White to KAD Gunmetal, an official CRS colour.

It came out with an R-tune carbon bonnet, Z-tune bodywork, LM GT4 wheels and R35 Brembos, and had covered just 262km when Broad Arrow offered it at its Concorso d’Eleganza Villa d’Este sale in May 2026. Octane reported an estimate of €700,000 to €850,000. It sold for €467,500, according to Magneto.

That miss says more about the market than the car. Most of the five-car R34 collection it sold with fell short of estimate, and someone got the most complete factory R34 you can own for a lot less than the catalogue hoped.

Can Australian owners get a NISMO restoration now?

Closer than ever. Australia is the first country outside Japan with a NISMO Performance Centre, and it’s in Melbourne. Nissan Australia says the centre at Ferntree Gully Nissan offers factory-certified NISMO Meisters, genuine performance and heritage parts, support for advanced restoration programs and a direct link to the Omori Factory, with more centres around Australia from 2027.

NISMO R4-spec RB26 engine with an Omori Factory plate, on display at the NISMO Performance Centre Melbourne
NISMO’s R4-spec RB26, wearing its Omori Factory plate, on display at the Melbourne centre. Image: Nissan Australia

That link matters more than it sounds. NISMO’s overseas guide says the Omori Factory sells parts and takes service work only from customers living in Japan, and its specialists speak Japanese only. Until now, an Aussie owner needed an agent in Japan just to start the conversation.

What Nissan hasn’t said yet is whether a full restoration or a CRS build can happen here, or whether the car still makes the trip to Japan. NISMO says its restored cars are managed through the Omori Factory, so start with the Melbourne centre and ask before you plan anything.

Sending a GT-R to Japan and back? Sort the paperwork first

If your GT-R does go to Omori, the hard part is bringing it home. Under the Road Vehicle Standards Act, you need a reimportation import approval from the Department of Infrastructure before a vehicle you exported comes back into Australia, and importing one without approval is an offence. Apply before the car is shipped home, not when it lands.

A CRS also changes a lot of the car: engine spec, suspension, brakes, wheels and bodywork. Factory-built or not, it still has to meet your state’s modification rules once it’s back on Australian plates. Run the list through our car modification laws checker and talk to a vehicle engineer or your state’s certification scheme before the build, not after.

CRS or a refresh: which one makes sense?

For almost everyone, the CRS is a dream rather than a plan. NISMO also offers a Complete refresh and overhaul, which it says is restoration-level work with the parts list scaled to your budget, and a Section refresh menu at the Omori Factory that tackles one area at a time. If your GT-R is a driver, start there.

The CRS is for the owner who wants the car Nissan would have built with another 25 years to think about it, the same obsessive streak that drives Singer’s 911s, only from the factory itself. Don’t send a tired, rusty shell expecting a miracle, because NISMO checks every car first and can say no. And don’t buy one to flip. Lake Como showed what happens when the market cools.

Either way, the road to Omori now starts in Melbourne’s east.

Auction figures as reported in May 2026; NISMO parts lists and restoration details checked November 2026. General information only: import and modification rules change, so check with the Department of Infrastructure and your state road authority before you ship or modify a car. Header image: Nissan Australia.

Source: NISMO (Nissan Motorsports & Customizing)

Via: Nissan Australia, Wikimedia Commons (8888Nippon, MrWalkr)

Join the Discussion

Would this one make your dream garage?

Every enthusiast has a car (or three) they'd park in the perfect garage. If this build stopped you in your tracks, tell us why in the comments. And if you've seen it in person, we'd love to hear what photos couldn't capture.

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Oldest
Newest Most Voted
Matt Hutchinson
Matt Hutchinsonhttps://torquepress.com
Matt Hutchinson is the Founder and Editor of TorquePress, a Melbourne-based car enthusiast who has been working on cars since childhood and combines hands-on ownership experience with a passion for everything from everyday family SUVs to modified performance cars and global car culture.

Disclaimer: TorquePress reviews are independent. Product supply or sponsorship never affects our conclusions. Sponsored content is labelled. See our Editorial Guidelines.

More to Explore

Toyota Just Revived Scion With a Kei Truck. Here’s How to Get One in Australia

Toyota has brought back Scion, and the first thing wearing the badge isn't a sports coupe. It's a kei truck.The Scion KEI-01 was revealed...